Jablotron JA-110C Bus photo verification Camera
JA-110C Bus photo verification camera
Taking a photo is either activated by the activation of a PG output, a request for taking a photo from the MyJABLOTRON Web Self-Service or by another detector (through PG activation). This setting is supplemented with an optional function of continuously taking photos - which are temporarily stored. They are later deleted if no detector activation occurs. If detector activation does occur at some point, a number of pre-activation photos are kept and post-activation photos are taken and kept in memory too, when it takes a pre-selected number of photos during and after detector activation.
The camera is equipped with infrared auxiliary lighting. The ambient lighting sensor of the camera can activate a PG output in the system (it can be e.g. used for switching external IR auxiliary lighting). The camera is monitored for tampering by a tilt detector. The use of an additional protective cover is recommended for outdoor use with a risk of direct contact with water. It occupies one position in the system.
|Power supply||via the control panel bus 12 V (9 - 15 V)|
|Current consumption (idle/with IR auxiliary lighting)||15 mA/150 mA|
|PIR detection angle of the camera||75°|
|IR auxiliary lighting range||max. 12 metres|
|Camera resolution||LQ 320x240; HQ 640x480 pixels|
|Environment according to||EN 50131-1, IV. outdoor, general|
|Operating temperature range||-20 to +60°C, max. humidity 75%|
|Ingress protection class||IP65|
|Dimensions||155 x 75 x 55 mm|
|In accordance with||EN 50131-1, EN 50131-3|
|In conformity with||EN 50130-4, EN 55022, EN 50581|