Wiring Modules

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The Jablotron JA-190PL multipurpse installation box for JA-100 modules.

Size: 90 x 90 x 35mm

The Jablotron JA-194PL multipurpse installation box for JA-100 modules.

Size: 182 x 132 x 45mm

Jablotron CC-01 Bus cable 1 x 2 x 20 AWG + 1 x 2 x 24 AWG unshielded EasyReel 300m.

Jablotron CC-02 Bus cable 2 x 2 x 24 AWG unshielded EasyReel 300m.

Jablotron CC-03 Bus cable 1 x 2 x 20 AWG + 3 x 2 x 24 AWG unshielded EasyReel 250m.

Jablotron CC-11 Bus cable 2 x 20 AWG + 2 x 24 AWG unshielded EasyReel 200m.

Flammability class B2CA with a high resistance to fire propagation along cables and to toxic combustion emissions.

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED . It is connected to the control panel via the bus. Size: 62 x 36 x 27 mm.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 detectors with contact outputs. (supports wired loops: NC, repeated pulses, single EOL or double EOL).

Check our BLOG  Jablotron 100 wired inputs for instructions and tips.

JA116H

The Jablotron JA-118M BUS module for magnetic detectors - 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced).

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc.

The relay output is programmable by the control panel.

The Jablotron JA-110N BUS power output module PG offers a switching relay (max 16A, 250V AC / 24V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

The Jablotron JA-111N BUS signal output module PG offers a switching relay (max 2A, 50V AC / 60V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.