Jablotron JA-111H-AD TRB Bus module for system control
The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.
JA111H-AD TRB = Arm / Disarm / Trouble
JA-111H-AD TRB Bus module for system control
This built-in module can be directly integrated into the control device.
One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed “Unset” signal.
- The module can be used to control programmable PG outputs.
- It allows you to set a minimum activation time for the controller (0.1 s - 300 s).
- The detector features impulse activation for dual-conductor control as well as status control for single-conductor control.
- The module is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.
|Compatible with||F-Link 1.4.0 or higher|
|Power||via the control panel bus 12 V (9 - 15 V)|
|Backup (idle) mode consumption||5 mA + consumption of the control device|
|Current consumption for cable selection||12 mA + consumption of the control device|
|Maximum acceptable load by the connected controller||50 mA|
|Dimensions||16 x 30 x 12 mm|
|Classification||security level 2 / environment class II|
|In accordance with||EN 50131-1, EN 50131-3 (ACE type B)|
|Operating temperature range||-10 to +40 °C|
|It also meets the requirements of||EN 50130-4, EN 55022|