Jablotron JA-114HN BUS module for 4 Inputs and 4 Outputs

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

Availability: In stock
Do you have a question about this product?

Jablotron JA-114HN Bus four-input and four-output module

Besides the EOL resistor type, the values of resistors can also be set for the inputs. The outputs are designed as galvanically separated ones (two have a common C terminal in each case). The module occupies four positions in the control panel and it is equipped with a front and rear tamper sensor.

It is mainly suitable for the refurbishment of wired alarms, where old detectors are kept. They are also very frequently used to control multiple appliances through the PG outputs. The auxiliary power supply makes it possible to supply current to boost relays connected to the signal output.

Specifications JA-114HN

Compatible with F-Link 1.4.0 or higher
Power: via the control panel bus 12 V (9…15 V)
Backup mode consumption 25 mA + consumption of connected devices
Current consumption (maximum) for cable selection 25 mA + consumption of connected devices
Maximum current from an output +U (electronic fuse) 200 mA
Maximum current / voltage switched by each output 500 mA / 38 V
Max. measured resistance at an input 20 kOhm
Max. length of supply lines of the inputs 100m
Dimensions 77 x 40 x 31 mm
Classification security level 2, ACE type B in accordance with: EN 50131-1, EN 50131-3
Environment II. indoor, general in accordance with EN 50131-1
Operating temperature range -10 °C to +40 °C
It also meets the requirements of EN 50130-4, EN 55022

Customer Reviews

Blog Posts (1)

Product Questions

No questions yet. Be the first to ask the question!