Search results for: 'VDL'

Jablotron BAT-3V6-N170 battery for the indoor siren JA-150A and JA-162A.

BAT-4V8-N900 battery for the JA-150R repeater, estimated lifetime is 5 years.

The Jablotron JA-1X1A-C-AN plastic anthracite cover for sirens JA-163A and bus JA-111A.

12V DC / 0,5A Power Adapter with a 1.1m flexible cable terminated by a plug is intended for powering Jablotron devices.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The Jablotron JA-165A is a wireless siren in a solid white housing.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The Jablotron JA-120PB combines a PIR motion sensor with a dual glass-break detector.

Breaking a window can be detected up to 9 meters away.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The Jablotron JA-159P is a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the detector to be used within the JABLOTRON 100 system.

The optical part of the detector has 2 PIR sensors and high immunity to false alarms and the detection of small animals.

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

The Jablotron JA-158P is a dual-zone outdoor wireless motion detector and has an Optex sensor and transmitter.

Communication range is 300m, detection range 12m.

The Jablotron JA-157P is a dual-zone outdoor wireless motion Oasis detector and has Optex sensors.

Communication range is 300m, detection range 12m.

The Jablotron JA-163A is a wire-free siren in a solid housing (covers: white, grey, anthracite or stainless steel).

Jablotron JA-160-C mounting-box-fitted wireless multi-functional power relay, it can be installed as a stand-alone device without a link to a control panel.

Switching relay with galvanic safety separation for 230V / 16A power loads.

Jablotron JA-112P-G Desig Line bus wired PIR motion detector has a better immunity for white light well above values required by the norm (up to 10.000 lux).

Guaranteed detection coverage is 90° / 12m, so up to 113m² of floor.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

The Jablotron JA-186P is designed to detect human body movement inside buildings.

Superior immunity for pets.

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

Jablotron JA-112P Design Line BUS wired PIR motion detector is designed to detect human body motion inside buildings.

The detection coverage is 90° / 12 m, so up to 113m² of floor.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The Jablotron JA-182SH detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill or otherwise.

JA-191PL Jointed bracket for JA-1x1P/1x2P PIR detectors. Only needed in exceptional places.

The Jablotron JA-114E is a 2-way wireless access module with keypad, LCD and RFID reader.

AVAILABLE in white, grey and anthracite.

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

The Jablotron JA-110P has a PIR sensor which covers up to 112m² of floor (optional pet, corridor and curtain lenses).

The Jablotron JA-110P has a PIR sensor which covers up to 90° / 7m of floor, its detection characteristics are modified and have a basic immunity to animals.

The Jablotron JA-110E is a BUS wired keypad with an LCD display, control keys and an RFID reader.

There are 4 functional keys for the control of sections, PG outputs and other functions.

NOTE: designed for the JA-100 control panel.

The JA-120PC is wireless component of the JABLOTRON 100 system.

It serves for the detection of human movement in building interiors and visual alarm confirmation.

The JA-150G-CO wireless module for connection of an Ei208(D)W CO detector.