| Type of installation |
Fixed installation |
| Nominal control panel voltage / frequency / fuse |
~ 230 V/50 Hz, T200 mA fuse 250 V, 5 x 20 mm
~ 115 V/60 Hz, T400 mA fuse 250 V, 5 x 20 mm |
| Operational AC voltage range |
~ 195 V ÷ 250 V
~ 110 V ÷ 120 V |
| Electric power/current |
max. 23 VA/0.1 A |
| Protection class |
II. |
| Back-up battery |
12 V; 2.6 Ah max. (lead-acid) |
| Low battery voltage (fault indication) |
≤11 V |
| Maximum battery charging time |
48 ÷ 72 hrs |
| BUS voltage/max. voltage ripple (red-black) |
12.0 ÷ 13.8 VDC/± 100 mV |
| Max. continuous consumption from the control panel BUS +RJ |
400 mA permanently (1000 mA for 5 minutes) |
| @ 12 hours backup (2.6 Ah) |
LAN OFF: 125 mA – consumption of modules JA-190X (Y)
LAN ON: 85 mA – consumption of modules JA-190X (Y) |
| Max. number of sections |
4 |
| Max. number of devices |
32 |
| Max. number of users |
33 |
| Max. number of PG outputs |
4 |
| Alarm connection |
Jablotron BUS – dedicated wiring
Wireless connection (with JA-111R) – unspecified wireless connection, Jablotron wireless protocol |
| Alarm system classification |
Security grade 2/environmental class II |
| @ according to standards |
EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN50131-10, EN 50136-1, EN 50136-2 |
| @ environment |
indoor general |
| @ operational temperature/humidity |
-10 °C to +40 °C, relative humidity 75% no condensation |
| @ power |
Type A – primary supply with a charged backup battery |
| @ event history |
approx. 7 million latest events, incl. date and time |
| @ system reaction to communication loss |
Fault or tamper – according to the pre-set profile
@ BUS until 10 sec
@ wireless communication in 2 hrs (report)
@ wireless communication in 20 min, blocks system to be set |
| @ reaction to invalid code entry |
After 10 wrong code entries a tamper alarm is triggered and according to the selected profile it blocks all control devices for 10 min |
| @ ATS classification |
Supported ATS classes: SP2 – SP 5, DP2 – DP3
SPT: type Z
Operation type: Pass-Througth
Built-in LAN: SP2 – SP5 (with IP protocol)
JA-190Y SP2 – SP5 (with IP protocol)
JA-190X SP2 (with Contact ID protocol)
LAN + JA-190Y DP2 – DP3 (with IP protocol)
LAN + JA-190X DP2 (with IP / CID protocol) |
| @ ATS transmission protocols |
JABLO IP, SIA IP, Contact ID, JABLO SMS |
| @ ATC protection against substitution and data protection |
Jablotron protocol: Proprietary AES encryption with minimum 128 bit key
ANSI SIA DC-09.2012 protocol with 128 bit AES encryption |
| LAN communicator |
Ethernet interface CAT 5 (RJ-45) |
| Dimensions |
268 x 225 x 83 mm |
| Weight |
1450 g |
| |
|
| Radio emissions |
ETSI EN 300 220-2 (R module) |
| EMC |
EN 50130-4, EN 55022, ETSI EN 301 489-7, ETSI EN 301 489-3 |
| Electric safety |
EN 60950-1 |
| Operational conditions |
ERC REC 70-03, ERC DEC (98) 20 |
| Certification body |
TREZOR TEST |
