Jablotron JA-120N Bus module for control of an electric lock
The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.
Inclusive: 3 x Eneloop rechargeable battery.
Size: 90 x 90 x 35 mm
The JA-120N can be conveniently installed in all places where an external power supply for electric lock control would be difficult to install. To module responds to a PG output of the control panel or it can be activated with a button connected to the IN input (it can be optionally locked by section control). The module is addressable and it occupies one position in the system
|Power supply||via the control panel bus 12 V (9 - 15 V)|
|Back-up battery||3x 1.2V NiMh Eneloop AA HR-3UTGA 1900mAh|
|Module consumption in idle state||10mA / 60 mA (without / with battery recharging)|
|DOOR output load||impulse (1s) 600 mA, permanent 300 mA|
|Recommended locks:||manufacturer: Conas ELSTR electric strikes (see below)|
|Dimensions:||90 x 90 x 35 mm|
|Environmental class according to EN 50131-1||II. General indoor|
|Operation temperature range||0°C to +40°C (for NiMh Eneloop)
-10°C to + 40°C (for NiCd)
|Security grade||2 in acc. with EN 50131-1, EN 50131-3,|
|It also meets the requirements of||EN 50130-4, EN 55022, EN 60950-1|