Search results for: 'VDL'

Jablotron VOD-JA-107K 12V DC Power cable for the JA-107K control panel.

Jablotron JA-122PW(G) BUS dual PIR and MicroWave motion detector is designed to detect human body motion inside buildings.

A high immunity to false alarms is reached thanks to the combination of PIR and microwave (MW) detection.

Its guaranteed detection coverage is 90° / 12 m, so up to 113m² of floor.

Jablotron JA-122PW BUS wired dual PIR / MicroWave Motion detector is designed to detect human body motion inside buildings.

A high immunity to false alarms is reached thanks to the combination of PIR and microwave (MW) detection.

Its guaranteed detection coverage is 90° / 12 m, so up to 113m² of floor.

The Jablotron CT-01 Shutter Movement Detector is a wired detector for detecting the unauthorised movement of external window shutters on houses or buildings.

The Jablotron JB-111N BUS signal output module PG offers a switching relay (max 2A, 50V AC / 60V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

The JA-110N-PG-DIN module is designed for a DIN rail and provides a power relay output.

The relay is programmable by the control panel PG outputs.

The Jablotron JB-110N BUS power output module offers a switching relay (max 8A, 250V AC / 24V DC) with NO or NC modes.

Jablotron JA-155J is a universal transmitter. It is used to operate devices remotely, for example opening garage doors.

The Jablotron JA-111i indicates activation of PG outputs by multi-colored LEDs (red, green, blue and yellow).

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

Rolling door metal contact also for metallic doors with cable in armoured tube.

Size: 107 x 38 x 11mm

Cable length: 75cm

The Jablotron JA-120PW has a PIR sensor with the combination of microwave detection.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane).

The detector detects two levels of gas concentration, responding with 2 different relay output reactions.

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-112i BUS activation indicator signals section setting or PG output activation (1-128) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

Jablotron JB-TS-PT1000 Temperature sensor with a cable for the temperature measurement of gaseous, liquid and solid substances in the range of -50 °C to +200 °C.

Cable length: 3m

12V DC / 0,5A Power Adapter with a 1.1m flexible cable terminated by a plug is intended for powering Jablotron devices.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The Jablotron JA-120PB combines a PIR motion sensor with a dual glass-break detector.

Breaking a window can be detected up to 9 meters away.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

Jablotron JA-112P-G Desig Line bus wired PIR motion detector has a better immunity for white light well above values required by the norm (up to 10.000 lux).

Guaranteed detection coverage is 90° / 12m, so up to 113m² of floor.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

Jablotron JA-112P Design Line BUS wired PIR motion detector is designed to detect human body motion inside buildings.

The detection coverage is 90° / 12 m, so up to 113m² of floor.

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The Jablotron JA-114E is a 2-way wireless access module with keypad, LCD and RFID reader.

AVAILABLE in white, grey and anthracite.

The Jablotron JA-110P has a PIR sensor which covers up to 112m² of floor (optional pet, corridor and curtain lenses).

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

The Jablotron JA-122PC-90 is used for motion detection, including visual alarm confirmation.

Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image.

Guaranteed detection coverage 90°/12 m.