Search results for: 'Ajax'

The radio channel controller allows to control domestic appliances remotely. It is used to switch on/off irons, garage gates, water heaters and heat-insulated floors.

Wireless module for connection of outdoor motion detectors, IR barriers, liquid level detectors, and gas detectors, thermal relays and any third-party devices with wired output to the Ajax security system.

Ajax ocBridge receiver module for connecting Ajax detectors to wired and hybrid security systems.

The device is integrated into any central unit with wired security areas.

JA-KNX is a KNX gateway for the Jablotron 100 alarm systems.

It enables bidirectional communication using the RS485 communication module (JA-121T) from Jablotron.

There are 2 models: standard or DIN-Rail.

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-150G-CO wireless module for connection of an Ei208(D)W CO detector. 

The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system bus to an RS-485 serial line and vice versa.

Size: 52 x 38 x 14mm

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

DOWNLOAD HERE

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

This Hikvision DS-K1T341AMF is a video intercom with a 4.3-inch LCD touchscreen and face-recognition capability.

• Max. Capacity of 1500 faces, max. 1500 cards
• Face Recognition. Distance: 0.5 m to 1.5 m

This Hikvision DS-K1T607MW is a video intercom with a 7-inch LCD screen and face-recognition capability.

The terminal features a 2 MP wide-angle dual-lens camera with backlight compensation and self-adjusting focus.

DS-K1T607 series "Face Regognition Terminal with Fingerprint Reader" is a new innovative access control product, which uses a 2MP, 7-inch screen to accurately recognize faces as well as read a fingerprint using biometric information to provide access to individuals.

Hikvision DS-K1T331W Standalone IP Wireless MinMoe Series Touch-Free Face Recognition Access Control Terminal.

For indoor use only.

Hikvision DS-KD-TDM is a intercom module, touch display with MiFare card reader

Hikvision DS-KD-INFO Modular Intercom Information Screen

• Displays information
• Backlighting
• Dimensions: 98.42 mm × 94.4 mm × 33.8 mm

The Hikvision DS-KD-DIS module is designed to work with the DS-KD8003-IME1 or DS-KD8003-IME2 video entry panel.

• Processor: Embedded MCU Processor
• Memory: 64 MB
• Display Screen: 3.5-Inch Colorful TFT LCD
• Display Resolution: 480 × 320

IP Intercom 2.0 video call station module with 2 MP camera, for outdoor use without button in brushed stainless steel design

Stainless steel Hikvision DS-KD8003-IME1/S IP video intercom outdoor station camera module.

• 2MP Full HD 180 degrees
• IR night vision
• PoE

Intratone IT-DINACR-32-0002 DINA Create Keyboard Anthracite.

Intratone DINA Create 1 Nameplate with bell push button.

Intratone IT-DINACR-32-0003 DINA Create Master module without central unit.