Search results for: 'VDL'

12V DC / 500mA Power Adapter with power Euro plug.

DSC Powerseries NEO PGTEMP-PROBE Waterproof probe for temperature measurement PG8905.

DSC PowerSeries NEO HS2TCHPE2 wired touchscreen keypad with Prox Reader.

12V DC / 0,5A Power Adapter with a 1.1m flexible cable terminated by a plug is intended for powering Jablotron devices.

Notifier CWSO-RR-W1 red conventional siren for indoor and outdoor, deep base.

Notifier CWSO-RR-S1 red conventional siren, low profile base.

Notifier CWSO-WW-S1 white conventional siren, low profile base.

Notifier CWSO-WW-W1 white conventional siren, deep base.

AJAX AJL-SIB1G2W SideButton (1-gang/2-way) white, button for side of frame. Push button for a single switch or two-way switch. Left or right button.

Available colours: black, white, ivory, oyster, graphite, grey, misty grey, olive green.

Honeywell FD-851RE is a conventional thermo differential detector for detecting temperature rises and high temperatures.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

DSC-1000-G2 Outdoor siren with built-in flash and orange hood

IT-PSU24-4A Power Adapter.

Notifier SD-851TE wired conventional fire detector is an optical and thermal smoke detector for detecting smoke development and temperature rise. 

Alarm exceeding 58°C.

DSC SS-102 shock detector.

Honeywell FD-851HTE is a conventional thermal fire detector, 78°C.

The detector goes into alarm when a temperature limit of 78°C is exceeded.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The Jablotron JA-121PB combines a PIR motion sensor with a dual glass-break detector.

Breaking a window can be detected up to 9 meters away.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

Notifier B524IEFT-1 is an ivory socket with built-in FET isolator

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

Jablotron JA-112P-G Desig Line bus wired PIR motion detector has a better immunity for white light well above values required by the norm (up to 10.000 lux).

Guaranteed detection coverage is 90° / 12m, so up to 113m² of floor.

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

AJAX AJL-CB2W SoloButton (2-way) white, push button for a single switch or two-way switch.

Available colours: black, white, ivory, oyster, graphite, grey, misty grey, olive green.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

Jablotron JA-112P Design Line BUS wired PIR motion detector is designed to detect human body motion inside buildings.

The detection coverage is 90° / 12 m, so up to 113m² of floor.

The Jablotron JA-114E is a 2-way wireless access module with keypad, LCD and RFID reader.

AVAILABLE in white, grey and anthracite.