Search results for: 'Conas'

The Jablotron JA-110B is a bus wired glass-break detector which recognizes the sounds of smashing window panes.

The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

Cooper Safety 531044FULL-0077 Solex Xenon Amber Len Shallow Base, white.

Size: 94 x 65mm

Cooper Safety 531047FULL-0077 Solex Xenon Amber Lens Shallow Base, clear.

Size: 93 x 65mm

The Jablotron JA-120PB combines a PIR motion sensor with a dual glass-break detector.

Breaking a window can be detected up to 9 meters away.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane).

The detector detects two levels of gas concentration, responding with 2 different relay output reactions.

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

SA-204 surface metallic contact for industrial applications and also metallic doors.

Working distance max. 40mm (size: 49x17x9 mm).

Stud mini contact with cable - extra thin. 

Jablotron SA-210 stud mini contact with cable - extra thin.

Magnetic wired door contact (NC) common type SA-200A (size: 50x14x12mm).

Jablotron SA-203 magnetic mini self-adhesive contact with wire (size: 33 x 8 x 9 mm).

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The Jablotron JA-192E-AN is an anthracite control segment for keypad access modules: JA-112E, JA-113E, JA-114E, JA-152E, JA-153E and JA-154E.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The Jablotron JA-192E-GR is a grey control segment for keypad access modules: JA-112E, JA-113E, JA-114E, JA-152E, JA-153E and JA-154E.

The Jablotron JA-192E-WH is a control segment for keypad access modules: JA-112E, JA-113E, JA-114E, JA-152E, JA-153E and JA-154E.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

The Jablotron JA-111A Base BUS wired outdoor back-up siren is designed to sound alarms, chirps and PG output activation or deactivation.

Powered by the BUS connection.

Backup battery included.

The Jablotron JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.

Jablotron JA-120E-BK is an outdoor black BUS wired access modul, with RFID and MIFARE frequency.

Jablotron JA-120E-WH is an outdoor white BUS wired access module, with RFID and MIFARE frequency.

The Jablotron JA-110A is a BUS-powered siren which sound alarms, as well as entrance and exit delays and PG activations.

The Jablotron JA-110A II is a BUS-powered siren with backup battery which sound alarms, as well as entrance and exit delays and PG activation's.

Rolling door metal contact also for metallic doors with cable in armoured tube.

Size: 107 x 38 x 11mm

Cable length: 75cm

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

Jablotron JA-121E-BK is a black bus outdoor keypad with reader, RFID and MIFARE frequency.

The Jablotron JB-111N BUS signal output module PG offers a switching relay (max 2A, 50V AC / 60V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

The Jablotron JA-122E-NFC BUS wired keypad controls door access and has a built-in RFID access card reader.

Jablotron JA-151IR is a wireless optical barrier, 4-beams 100m.

The infrared barrier is protected for outdoor installation and works reliably even under adverse weather conditions such as rain or snowfall 

The Jablotron JA-123E RFID card reader and keypad can be used for the activation of a PG output by which you can control access to an area, for example an electric lock or/and unsetting the security system.

Jablotron JA-121E-WH is a white bus outdoor keypad with reader, RFID and MIFARE frequency.

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-112i BUS activation indicator signals section setting or PG output activation (1-128) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

Jablotron CC-01 Bus cable.

- 1 x 2 x 24 AWG (0.2mm²)
- 1 x 2 x 20 AWG (0.5mm²)