Search results for: 'Hikvision'

Sewosy EF150ENCCTC CA electromagnet (closing magnet 150kg) mortise mount, 12V /24V DC.

• Magnet 174 x 33 x 25mm
• Steel plate: 130 x 33 x 11mm
• LED indication: No
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (480mA) / 24V (240mA)
• Holding force: 150kg (mortise)

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

Sewosy EF30035ENCCTC-CA electro magnet 300 DaN with status feedback contact for narrow profiles.

• Magnet 195 x 35.5 x 27mm
• Steel plate: 180 x 38 x 11mm
• LED indication: No
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (480mA) / 24V (240mA)
• Holding force: 300kg (mortise)

Sewosy EXT200CTC Electromagnet stainless steel 180kg surface mounted, IP65 suitable.

• Magnet 165 x 34,5 x 27,5 mm
• Steel plate: 130 x 33 x 11 mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: Yes - IP65
• Voltage: 12V (500mA) / 24V (250mA)
• Holding force: 300kg (surface)

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

Sewosy Electromagnet 150kg surface mounted with status contact.

• Magnet 210 x 39.8 x 21mm (LxWxH)
• Steel plate: 130 x 33 x 11mm
• LED indication: No
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (480mA) / 24V (240mA)
• Pull force: 150kg

Sewosy EF300CTC Electromagnet 300kg surface mounted with feedback contact and LED.

• Magnet 250 x 48 x 25mm (LxWxH)
• Steel plate: 180 x 38 x 11mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (480mA) / 24V (240mA)
• Pull force: 300kg

Sewosy Electromagnet 500kg indoor surface mounted with feedback status contact and LED.

• Magnet 266 x 76 x 39 mm
• Armature plate: 185 x 61 x 16.5 mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (480mA) / 24V (240mA)
• Holding force: 500kg (surface)

Sewosy Electromagnet stainless steel (locking magnet 370DaN) surface mounted with feedback contact.

• Magnet 220 x 46 x 28mm (LxWxH)
• Anchor plate: 182 x 44 x 12mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: Yes - IP65
• Voltage: 12V (500mA) / 24V (250mA)
• Pull force: 370DaN

Sewosy EF150-2CTC double surface mount electromagnet 2x 150kg.

• Magnet 420 x 40 x 21mm (LxWxH)
• Steel plates: 130 x 33 x 11mm each
• LED indication: Yes
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (2x 480mA) / 24V (2x 240mA)
• Pull force: 2x 150kg (surface)

Sewosy EF300-2CTC double surface mount electromagnet 2x 300kg + feedback contact + LEDs.

• Magnet 500 x 48,4 x 25,8mm (LxWxH)
• Steel plates: 180 x 38 x 11mm each
• LED indication: Yes
• Status output: Yes - each
• Weatherproof: No - IP42
• Voltage: 12V (2x 480mA) / 24V (2x 240mA)
• Pull force: 2x 150kg (surface)

Sewosy Double surface mount electromagnet 2x550 DaN. Power supply: 12/24VDC + feedback contact + LEDs.

• Magnet 532 x 76 x 39 mm
• Armature plates: 185 x 61 x 16.5 mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (2x 480mA) / 24V (2x 240mA)
• Holding force: 2x 550kg (surface)

AJAX 45112 LightCore (2-way) flush mounted relay is a smart touch light switch.

This 2-way variant is made for hotel-switching.

AJAX LightCore (2-way) flush mounted relay is a smart touch light switch.

This 2-way variant is made to operate two separate lamps.

Sewosy ADE12015 is a recessed power supply

12VDC/1.5A

The Jablotron JA-110F BUS detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms).

Size: 53 x 20 x 10mm

AJAX 45110 LightCore (1-way) flush mounted relay is a smart touch light switch.

Wireless relays for a single switch.

The BWare™ QUAD AM Grade 3 detector is a wired indoor detector with dual PIR technologies.

Quad = 2x Dual Technology PIR
AM = Anti Masking

RK500Q0G3

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

AC-WS-FS1 Mobeye WaterGuard float sensor where any water based liquid needs to be detected.

Type: NO/NC contact. Cable length: 2 meter (extension possible)

The DS-K1108AEK is a card reader from the access control line of Hikvision.

The card reader can read EM cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.

The DS-K1201AEF is a fingerprint card reader from the access control line of Hikvision.

The reader can read EM cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.

The Jablotron JA-80Q is designed for Oasis systems for transmitting photographs when using the JA-80Y communication module. 

The Jablotron JA-81E RGB is to control and program the system and has a built-in proximity access card reader with an input for a separate door detector and a variable colour display.

The Jablotron OS-365A is a wired outdoor backup siren combining a loud magneto-dynamic horn siren siren with a flashing light.

Notifier MCP2A-R470FF-01 Indoor Call Point with LED and Flex Element, Red.

• Equipped with built-in 470 Ohm resistor
• Equipped with a LED status indicator
• Equipped with two N.O. (Normally Open) contacts
• Complies with EN54-11

Relay base 12V B312RL for SD detectors

This product is EOL (End Of Life). Alternative: ECO1000BREL series

Relay base 24V B324RL for SD detectors

Dimensions: 127 x 29mm

THIS PRODUCT IS EOL

Alternative is the ECO1000BREL24L.

The Jablotron JA-111ST BUS wired smoke and temperature detector indicates fire hazard using the built-in LED indicator and acoustic signalling.

EOL - End of Line: NO LONGER IN PRODUCTION

Jablotron SA-201-A magnetic wired door contact (NC) miniature.

Ssize: 28 x 12 x 7 mm