The Jablotron DAViD or OASiS (see left vertical menu) can be used to remotely control two independent heating areas. In order for the console to be used for this function it has to work together with an AC-82 receptor and two TP-80 or TP-82 thermostats (one for each area).
The system’s operation is simple. The thermostats have to be registered on the AC receiver (which is connected to the heating equipment) and simultaneously the receiver has to be configured to replicate the state of the programmable outputs of DAViD´s / OASiS control panel. This type of configuration enables you to locally or remotely activate (PG-on) the programmable outputs of the control panel, so that the receiver activates its outputs according to the signals sent by the thermostats. When DAViD´s or OASiS programmable outputs are deactivated (PG/off), the receiver ignores the signals sent by the thermostats and now activate the heating system only, so as to maintain a pre-programmed minimum room temperature of 6ºC, in order to prevent the water from freezing.