Search results for: 'VDL'

AJAX AJL-SIB1G2W SideButton (1-gang/2-way) white, button for side of frame. Push button for a single switch or two-way switch. Left or right button.

Available colours: black, white, ivory, oyster, graphite, grey, misty grey, olive green.

The NRXI-GATE is the receiver needed to install components wirelessly.

The receiver is integrated in an analog fire alarm system.

Honeywell FD-851RE is a conventional thermo differential detector for detecting temperature rises and high temperatures.

DSC Powerseries NEO PG8936 is a fully supervised wireless smoke and heat detector.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

Powerseries NEO HS2032PCBE Motherboard with 32-zone control panel.

Powerseries NEO HS2064PCBE Motherboard with 64-zone control panel.

Size: 95 x 190 x 27mm

Notifier SD-851TE wired conventional fire detector is an optical and thermal smoke detector for detecting smoke development and temperature rise. 

Alarm exceeding 58°C.

DSC-1000-G2 Outdoor siren with built-in flash and orange hood

Notifier RMK400AP is an ivory mounting kit for B501 AP plinth

Ajax MotionProtect detects a person in a room, but ignores pets and, for example, drafts and noise from an air conditioner.

The SmokeCloak FL600 is a liquid that is used as a refill for fog generators.

The content is 1.7 liter.

Honeywell FD-851HTE is a conventional thermal fire detector, 78°C.

The detector goes into alarm when a temperature limit of 78°C is exceeded.

DSC SS-102 shock detector.

The Jablotron JA-120PB combines a PIR motion sensor with a dual glass-break detector.

Breaking a window can be detected up to 9 meters away.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The Jablotron JA-159P is a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the detector to be used within the JABLOTRON 100 system.

The optical part of the detector has 2 PIR sensors and high immunity to false alarms and the detection of small animals.

Lithium battery for the Oasis JA-82M and JA-182M.

Battery overview for the Jablotron OASiS and 100 series

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

The Jablotron JA-158P is a dual-zone outdoor wireless motion detector and has an Optex sensor and transmitter.

Communication range is 300m, detection range 12m.

The Jablotron JA-157P is a dual-zone outdoor wireless motion Oasis detector and has Optex sensors.

Communication range is 300m, detection range 12m.

Lithium battery for the 100 series.

Battery overview for the Jablotron OASiS and 100 series

Notifier B524IEFT-1 is an ivory socket with built-in FET isolator

The Jablotron JA-163A is a wire-free siren in a solid housing (covers: white, grey, anthracite or stainless steel).

Lithium battery for the Oasis and 100 series: JA-81F / JA-84P / JA-83M / JA-83P / JA-183M / JA-182SH / JA-150E / JA-152P / JA-155P / JA-158P / JA-162PC / JA-159P / JA-157P / JB-EXT-TH-R.

Battery overview for the Jablotron OASiS and 100 series

BAT-3V0-CR123A

DSC PowerSeries NEO PCL-422 External Communicator.

Jablotron JA-160-C mounting-box-fitted wireless multi-functional power relay, it can be installed as a stand-alone device without a link to a control panel.

Switching relay with galvanic safety separation for 230V / 16A power loads.

Jablotron JA-112P-G Desig Line bus wired PIR motion detector has a better immunity for white light well above values required by the norm (up to 10.000 lux).

Guaranteed detection coverage is 90° / 12m, so up to 113m² of floor.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

With this hybrid starter kit from the DSC Wireless Premium series, you have a comprehensive package for securing a home or business.

• WP8033-NL Control panel
• LAN Communication module
• WK250-NL wireless Keypad
• 2 x : PG8945 wireless magnet contact with wired input
• 1 x : PG8914 wireless PIR motion detector

The Jablotron JA-186P is designed to detect human body movement inside buildings.

Superior immunity for pets.

This starter kit consists of a 64 zone burglar panel in a large DSC casing (PC5006C) with an LCD control panel with Prox reader and RF receiver (HS2LCDRFPE2) and a 12V-7Ah battery (NP7-12).

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm