Search results for: 'Hikvision'

Notifier M1A-R470FF-STCK-01 indoor Call Point designed for semi-flush mounting.

• With built-in 470 Ohm resistor
• Features a N.O. (Normally Open) contact
• Complies with EN54-11

DSC SS-102 shock detector.

The Jablotron JA-113E is a BUS wired access module with keypad and RFID reader.

AVAILABLE in white, grey and anthracite.

PowerSeries NEO 220-16.5V Transformer 230V with 16.5V AC output voltage, 40 VA.

Sewosy Shearlock Electromagnet 540 DaN, for single direction doors or swing-through doors.

• Magnet 180 x 30 x 27 mm
• Armature plate: 180 x 33 x 29.5 mm
• LED indication: Yes
• Status output: Yes
• Weatherproof: No - IP42
• Voltage: 12V (420mA) / 24V (210mA)
• Holding force: 540kg (surface)

Jablotron JA-155J is a universal transmitter. It is used to operate devices remotely, for example opening garage doors.

12V DC / 500mA Power Adapter with power Euro plug.

The Jablotron JA-122E-NFC BUS wired keypad controls door access and has a built-in RFID access card reader.

Large DSC 16V80VA-240V DSC Transformer 16V / 80VA.

AJAX AJ-12VPSU-V2 12V Power Supply Board (only HUB2).

The Jablotron CT-01 Shutter Movement Detector is a wired detector for detecting the unauthorised movement of external window shutters on houses or buildings.

The Mobeye 4G Outdoor Alarm combines the reliable Optex Infinity detector with Mobeye battery powered communication technology.

Ideal for outside (temporary) security and places where there is no power supply.

DSC LC-104-PIMW-EU QUAD motion detector with microwave function.

The Jablotron JB-111N BUS signal output module PG offers a switching relay (max 2A, 50V AC / 60V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

Patchcable Cat6A 0.5 meter S/FTP.

DSC-FL1 Outdoor wired orange flash unit

The flash unit is powered by a 12V DC voltage and has a flash frequency of 75 per minute.

The Jablotron JA-122PC-90 is used for motion detection, including visual alarm confirmation.

Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image.

Guaranteed detection coverage 90°/12 m.

Jablotron VOD-JA-107K 12V DC Power cable for the JA-107K control panel.

Sewosy ADS1202 is an adapter power supply 12VDC, 2A

UTP CAT5E patch cable - 10m.

The Jablotron JA-123E-NFC card reader 13.56kHz and keypad can be used for the activation of a PG output by which you can control access to an area, for example an electric lock or/and unsetting the security system.

JA-KNX is a KNX gateway for the Jablotron 100 alarm systems.

It enables bidirectional communication using the RS485 communication module (JA-121T) from Jablotron.

There are 2 models: standard or DIN-Rail.

The Jablotron JA-114E is a 2-way wireless access module with keypad, LCD and RFID reader.

AVAILABLE in white, grey and anthracite.

The Jablotron JA-110ST BUS wired smoke and temperature detector is designed to detect the presence of fire inside a building.

No internal siren.

AJAX AJ-6VPSU-V2 6V Power Supply Board Hub2 and Hub2Plus.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

Mobeye wired door / window magnet contact.

SmokeCloak USB-B-5M USB Plug is widely used for connecting printers or scanners to the computer.

The cable has 2 male connectors, both A and B.

The Jablotron JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

Jablotron SA-203 magnetic mini self-adhesive contact with wire (size: 33 x 8 x 9 mm).

SA-204 surface metallic contact for industrial applications and also metallic doors.

Working distance max. 40mm (size: 49x17x9 mm).

Stud mini contact with cable - extra thin. 

Jablotron SA-210 stud mini contact with cable - extra thin.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

AJAX AJ-12VPSU-V1 12V Power Supply Board (HUB, HUBPLUS, REX).