Jablotron OASiS 80

Jablotron OASiS 80 - Selection Overview

Jablotron OASiS 80 alarm system

GERMANY: JK-84 is test-winner, click here for the German article. JA-82ST fire detector JA-85ST fire detector OASiS ready made kits AC-88 wireless socket JA-82M magnetic window detector JA-81M magnetic window/door detector JA-83M compact magnetic window/door detector JA-80L indoor siren JA-83P compact motion detector JA-80P motion detector JA-80W motion detector with radar JA-80PB motion- and glass-break detector JA-86P motion detector with superior pet immunity JA-84P motion detector with camera JA-80A outdoor siren Bat-80A battery for the JA-80A outdoor siren SA-214 Batteries Control panels Interface cable JA-82T for a computer connection using Olink software (free download) JA-87P outdoor motion detector JA-80H outdoor keypad JA-80N outdoor card-reader WJ-80 Wiegand interface module JA-81 wired and wireless keypads Jablotron RB DIN relay output module Thermostats JA-85B compact glass-break detector Water / Flood detectors (LD-81 / LD-12) Compact motion detector RC-87 wrist button RC-82 remote control Overview Jablotron OASiS batteries

* = standard components of a Jablotron OASiS starter-kit. Select any component for the product page.    


Jablotron OASiS is a kit from which a personalised system can be easily customised. Similar in concept to the popular Profi system, but using a more modern wireless encrypted 868MHz protocol. The devices have a longer communication range (300m) and the antennas are not visible, its batteries have a longer life (± 3 years) and in general a more modern design.

The OASiS is suitable for both residential areas as well as shops, offices, stores, workshops, etc. It can report theft, fire, flooding, frost risk, the risk of overheating, health problems, intrusion and other possible risks. The system has the option of a unique wireless motion detector with a built-in stills camera. It sends the alarm images to mobile phones and PC's. It makes visible what is really happening at your place.

Jablotron OASiS also allows you access control: opens electric locks, garage doors, gates, etc.. This is possible by entering a numeric code, by presenting a reader with an RFID chip in a card / key-fob, or a remote control. The system also offers home automation, e.g. remote control of appliances, heating control, switching appliances with (motion) detectors or remote controls.


Jablotron OASiS Configuration

 

Protecting a car near the system

The compact mini-size detectors of the OASiS system can also protect a car (cars) parked in the proximity of the house. The mini-sized car detectors can be assigned to their own dedicated section in the system. The control panel however, routinely checks the wireless communication of its devices. If communication with a particular device is lost for two hours, the control panel can report a fault indication. In the OASiS system, communication is checked every 9 mins. The mini-sized detectors have the option to disable radio communication supervision by internal dip-switches. It allows car detectors to be excluded from supervision to avoid alarm triggering when driving the car away from the system.

 

 


 
 


Confirmation of intruder alarm

To reduce the risk of false alarms and to comply with the standards (for example the British standard BSI DD243), the control panel allows alarm confirmation logic to be enabled. Alarm confirmation drastically reduces the disruption and cost associated with false alarms and this logic-option is necessary to get connected (i.e. get alarm follow-up) to an alarm receiving centre. If the system is set (armed) and any intruder detector gets triggered, i.e. a detector with an instant, delayed, or next-delayed reaction, an alarm will not be caused and the control panel will record a so-called unconfirmed alarm. When the first detector is triggered it begins a process which waits 40 minutes for any possible confirmation of the alarm (unconfirmed alarm status) during which the system works exactly the same way as if the confirmation function had not been enabled.

 



Partial Arming or System Splitting

The control panel can be configured in three ways:
1. unsplit - the entire system sets and unsets together (see also figure 1. below) or,
2. partial arming - the system partially sets and unsets to protect only certain parts of a house during the day, ideal for a family situation where people are still present (for example at night) in the unset parts of the house (figure 2. below) or,
3. split arming - the system can be split into two independently set / unset sections for two separate users and also with a common section if desired - part C. Ideal for businesses who share one office building or for your office located next to your house (see figure 3. below).

 

Alarm Sections


 

Final-door function

 In this mode, up to 5 detectors can be defined as final-door detectors in order to make leaving a building much easier, especially via a garage. If a final-door detector is used in the system then this detector can be programmed to extend the exit- or entrance delay. This mode is unsuitable for pulse detectors such as JA-80P motion detectors. If a final-door detector is triggered during the exit delay, the exit delay will be extended by the time in which the detector is still triggered. So, if for example, the door is left continuously open, the exit delay will never end.

Bypass User Approval

This setting can change the function of the system when it is being armed and if there is: any detector triggered, any tamper alarm, any trouble in the power source, lost communication with any wireless device (for more than 20 minutes) or any panic button triggered. If bypass user approval is set, then during arming, the system notes which problems mentioned above are active and displays informative text on the keypad and only bypasses them if the user approves the bypassing.

Social Alarm Feature

If this function is enabled the signals from delayed, next delayed and instant detectors are regularly checked in disarmed mode. If there is no active signal (no movement inside) for more than 16 hours a panic alarm is triggered.

Automatic Setting / Unsetting

This can be used to program an automatic sequence of daily setting/unsetting events (timer). Up to 10 daily events can be programmed. Events will occur every day of the week.


...AND MANY MORE!