Search results for: 'Honeywell'

SmokeCloak USB-B-5M USB Plug is widely used for connecting printers or scanners to the computer.

The cable has 2 male connectors, both A and B.

The Jablotron JA-110P has a PIR sensor which covers up to 90° / 7m of floor, its detection characteristics are modified and have a basic immunity to animals.

The Jablotron JA-113A Base BUS wired outdoor back-up siren is designed to sound alarms, chirps and PG output activation or deactivation. Can be operated without a backup battery, optional accessory.

Powered by the BUS connection.

The Jablotron 12V DC-powered LD-12 detector is a water flood indicator for rooms (e.g. cellars, bathrooms) connected to a Jablotron alarm system’s wired input.

Cable is 2,5m.

VDL, CCTV terminal block with terminals for standard mast, type 5L6006.

Dimensions 330 x 61 mm

UTP CAT5E patch cable - 10m.

Jablotron Transformer for OASiS JA-82K and 101K series Control Panels.

TRF-01A

Patchcable Cat6A 0.5 meter S/FTP.

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

Perfect for creating passive PoE connections.

Uniview CAB-LC3100B-IN CAT6/UTP/305m OFC/0.565mm network cable.

- 100% copper cable

- Length: 305m

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-112i BUS activation indicator signals section setting or PG output activation (1-128) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

CP-201T Resistor temperature sensors (2 sensors per packaging) are designed for universal use in detecting temperature of liquid, gaseous, and solid substances.

Cable length: 3m

The Jablotron JA-110F BUS detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms).

Size: 53 x 20 x 10mm

JA-KNX is a KNX gateway for the Jablotron 100 alarm systems.

It enables bidirectional communication using the RS485 communication module (JA-121T) from Jablotron.

There are 2 models: standard or DIN-Rail.

Jablotron JA-155J is a universal transmitter. It is used to operate devices remotely, for example opening garage doors.

UTP Cat 6 Ground Cable. This cable is used for high bit-rate data transmissions in structured cable systems.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane).

The detector detects two levels of gas concentration, responding with 2 different relay output reactions.

The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system bus to an RS-485 serial line and vice versa.

Size: 52 x 38 x 14mm

Jablotron JA-120Z Bus back-up booster. Designed for current boosting of the bus, extension of the line length and galvanic isolation of the bus.

The Intellinet PoE+ extender / repeater offers you the possibility to extend the distance of PoE (Power-over-ethernet) by 100 meters.

Optionally you can place multiple extenders one after the other to extend the distance with about 100 meters to a maximum of 600 meters.

UTP CAT5E patch cable - 5m.

ActiView AV-ABI100-482 wired IR Barrier Twin Beam with 2 beams, 100m.

Barrier height: 48cm

ActiView AV-ABI10 is a wired IR barrier with 2, 4, 6, 8, 10 or 12 beams, 10m.

Barrier height is: 48cm

KT-400 is an Ethernet-ready 4-door controller that provides 128-bit AES encrypted communication with the EntraPass Security Software.

NOTE: The Kantech KT-400-EU has been replaced by the KT-4-EU

Relay base 12V B312RL for SD detectors

This product is EOL (End Of Life). Alternative: ECO1000BREL series

Relay base 24V B324RL for SD detectors

Dimensions: 127 x 29mm

THIS PRODUCT IS EOL

Alternative is the ECO1000BREL24L.

The DS-K1108AEK is a card reader from the access control line of Hikvision.

The card reader can read EM cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.

The Jablotron JA-81E RGB is to control and program the system and has a built-in proximity access card reader with an input for a separate door detector and a variable colour display.

Kantech KT-PC4204 4-Relay Module.

The Jablotron JA-80Q is designed for Oasis systems for transmitting photographs when using the JA-80Y communication module. 

The Jablotron JS-22 wired detector is intended to detect human body movement inside buildings.

Using two sensors ensures better immunity against triggering by moving pets.

Jablotron SA-201-A magnetic wired door contact (NC) miniature.

Ssize: 28 x 12 x 7 mm

The Jablotron JA-110A II is a BUS-powered siren with backup battery which sound alarms, as well as entrance and exit delays and PG activation's.