Jablotron JA-160PC wireless PIR motion detector with built-in camera
The JA-160PC is wireless component of the JABLOTRON 100 system.
It serves for the detection of human movement in building interiors and visual alarm confirmation.
Detection angle: 55º / 12m
Jablotron JA-160PC wireless Photo PIR
The camera takes colour photos with a resolution of up to 640 x 480 pixels by detecting human movement while the system is set. The camera is equipped with a visible flash for taking photos in the dark. The images are saved in the internal memory of the detector and then they are forwarded to the control panel. From the control panel they can be sent to an external mass storage area, ARC and a user. The detector can also take a photo on command if it is required (e.g. fire alarm confirmation).
Every picture is taken as a double exposure: the first with low resolution (LQ = 320 x 240 pixels), second with high resolution (HQ = 640 x 480 pixels). All of the exposures are saved in the internal memory (micro SD on the detector PCB) into the independent folders Foto_LQ and Foto_HQ. When the card is fully loaded, the oldest pictures are replaced by new ones. Pictures saved on the micro SD card can be browsed by a usual PC browser. Note: Some antivirus software writes checking data on the micro SD card. After reinserting the SD card into the detectors, due to the unknown file (the checking data) card formatting will be performed.
The SD card formatting erases all data which has been saved. For more information about formatting see Formatting the micro SDcard.
Photos are sent to the control panel in LQ. You can browse through the images by F-Link and J-Link software (In the event memory, click on the event New image). Pictures are displayed in LQ, if you click on Detail you can get second-exposure pictures (HQ). Images can be searched and browsed by a file manager or picture browser. For another option to show the pictures it is necessary to start F-Link (J-link) software and be logged into the control panel as a service technician or Administrator and then under Disc: Flexi_log /Foto photos which have been sent to the control panel (LQ) and photos which have been requested in Detail (HQ) are available.
Technical specifications JA-160PC
|Power||2 AA (LR6) 1.5V 2400 mAh alkaline batteries|
|Typical lifetime||about 2 years (1 activation takes 1 series of photos a day)|
|Recommended installation height||2.5 m above the floor|
|Detection angle / detection coverage:||55° / 12 m (basic lens)|
|Horizontal camera capture angle||43°|
|Range of the flash||max. 3 meters|
|Resolution of the camera||LQ 320 x 240; HQ 640 x 480 pixels|
|Photo size LQ/HQ (typically)||2-10 kB / 2-64 kB (6 kB / 35 kB)|
|Typical (LQ) photo transmission time to the control panel (ideally)||up to 20 sec. (10 sec.)|
|Typical (HQ) photo transmission time from the control panel (ideally)||up to 130 sec. (60 sec.)|
|Typical photo transfer time from the system to the server||15 s/GPRS; 2 s /LAN|
|Operational environment according to EN 50131-1||II. Indoor general|
|Operational temperature range||-10 to +40 °C|
|Dimensions, weight||110 x 60 x 55 mm, 102 g|
|According to||EN 50131-1, EN 50131-2-2|
|Also complies with||ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1|
|Can be operated according to||ERC REC 70-03|