Jablotron JA-120PC-90 BUS wired PIR Camera motion detector, 90º
The Jablotron JA-120PC-90 is used for motion detection, including visual alarm confirmation.
Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image.
Guaranteed detection coverage 90°/12 m.
Availability: In stock
SKU
JA-120PC-90
JA-120PC (90) Bus PIR motion detector with 90° photo-verification camera
- Vision angle of the camera: 90°
- Resolution of photos: LQ 320*240; HQ 640*480 pixels
- Flash range: max. 3 metres
- Power via the control panel bus
- The detector has impulse activation
- The detector can be used to control programmable PG outputs
- The resistance to false alarms is adjustable to two levels
- The detector is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system
Specifications
| Compatible with | F-Link 1.5.1 and higher |
|---|---|
| Power | via the control panel bus +12 V (+9 - +15 V) |
| Backup (idle) mode consumption | 5 mA |
| Current consumption for cable selection | 250 mA |
| Recommended installation height | 2.5 m above floor level |
| Detection angle / detection coverage | 90°/12 m |
| Vision angle of the camera | 90° |
| Flash range | max. 3 metres |
| Resolution of photos | LQ 320*240; HQ 640*480 pixels |
| Size of LQ / HQ photos | 2-20 kB / 2-64 kB (typically 6 kB/35 kB) |
| LQ photo transmission time to the control panel | (ideally) within 20 sec. (10 sec.) |
| HQ photo transmission time to the control panel | (ideally) within 130 sec. (60 sec.) |
| Typical transfer time of a photo to the server | 15 s/GPRS; 2 s/LAN or 3G |
| Dimensions | 110 x 60 x 55 mm |
| Classification | security level 2 / environment class II |
| In accordance with | EN 50131-1, EN 50131-2-2 |
| Operating temperature range | -10 to +40 °C |
| Environment | General indoor |
| It also meets the requirements of | EN 50130-4, EN 55022 |
.
We found other products you might like!
