Skip to the beginning of the images gallery

Jablotron AC-160 DIN wireless Relay (max 16A, 250V AC / 24V DC)

Jablotron AC-160 DIN wireless multi-functional relay for DIN-rail installation, it can be installed as a stand-alone device without a link to a control panel.

Availability: In stock

SKU

AC-160-DIN

Partner Discount Customer Service Right of Withdrawal

Exemption from VAT Worldwide Shipping Helpdesk +31 207 372 372

Do you have a question about this product?

Ask Question

Details

AC-160-DIN wireless Multi-functional Relay for DIN-rail installation

It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK.

The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port.

It is designed to be mounted on a DIN rail. It occupies one position (zone) in the system.

Specifications

Loading capacity of the power relay contacts:
Power supply	~ 230 V / 50 Hz, protective class II.
Internal power consumption	0.4 W / max. 1.5 W
(galvanically isolated from the control terminals)	protection class II:
Max. switched voltage	250 V AC / 24 V DC
Resistance load (cosφ=1)	max. 16 A
Inductive, capacitive loads (cosφ=0.4)	max. 8 A
Halogen lighting	max. 1000 W
Minimum switched DC power	0.5 W
Wire cross section	max. 2 x 1.5 mm²; max. 1 x 2.5 mm²
Dimensions	18 x 90 x 65 mm, 1 DIN module
Environment according to	II. indoor, general, in accordance with EN 50131-1
Operating temperature range	-10 to +40 °C
Ingress protection class	IP20, IP40 for the front panel (EN 60529)
In conformity with	ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581.