Hikvision DS-KD8003-IME2 Camera Module

Hikvision DS-KD8003-IME2 is a 2-wire Camera Module of the modular intercom series.

  • 2MP camera with WDR, backlighting is no problem
  • angle of view 180°, there is a good overview
Availability: In stock
SKU
DS-KD8003-IME2
€175.00 €144.63
Do you have a question about this product?
Frank

Hikvision DS-KD8003-IME2 2-wire Camera Module

The camera module of the Hikvision modular intercom ensures that everything is perfectly in view. Thanks to the 2MP camera with WDR, backlighting is no problem for this camera. Thanks to the opening angle of 180° there is a good overview of the situation.

All added modules (up to a max of 8) are powered via this camera module. This provides additional ease of installation.


Specifications DS-KD8003-IME2

Camera Parameters
Field of view: 180° (Horizontal), 96°(Vertical)
Video Parameters
WDR: Supported
DNR: Supported
BLC: Supported
Camera: Low Illumination 2 MP HD IR Camera
Video Compression Standard: H.264
Resolution: Main Stream: 1920 × 1080 Sub Stream:720 × 480
Anti-flicker frequency: 50 Hz, 60 Hz
Audio Parameters
Audio Input: Built-in Omnidirectional Microphone
Audio Output: Built-in Loudspeaker(More than 85dB within 20 cm)
Audio Compression Standard: G.711 U
Audio Compression Rate: 64 Kbps
Audio Quality: Noise Suppression and Echo Cancellation
Light Supplement
Light Supplement Mode: IR Supplement
Alarm Parameters
Tampering alarm: 1
Device Interfaces
Debug: 1
Module-connecting: 1
Relay Output: 2(30V, 1A)
I/O Input: 4
General
Installation: Flush Mounting, Surface Mounting
Power Supply: IEEE802.3af standard PoE, 12 VDC/1A
Power Consumption: ≤10 W
Physical button: 1
Working Humidity: 10% to 95%
Working Temperature: -40° C to +60° C (-40° F to 140° F)
IP Protection Level: IP65
Dimensions(L × W × H): 98mm × 99.8mm × 43.9mm (3.86"× 3.93" ×1.73")
System Parameters
Operation System: Embedded Linux Operation System
Operation method: Physical Button
Processor: Embedded MCU Processor

Customer Reviews

Product Questions

Where do I request a password-reset xml-file?
Question by: Frank on Jan 18, 2021, 12:19 PM
Mail the following information to resets@pg-securitysystems.nl:
(WITHOUT this data a password recovery is impossible!)

- The full serial number from SADP (as text);
- A photo of the label on the camera and / or recorder;
- Your name / phone number;
- The export file from SADP (or the start time with the old firmware).

Regards
Answer by: Frank Ligthart on Jan 18, 2021, 12:45 PM
I get a 'password invalid' after every reboot/factory reset. The provided reset-XML does not work.
What can be wrong?
Question by: Frank on Jan 18, 2021, 12:08 PM
Please make sure you use the right protocol:

>>What if the password reset doesn't work?
* make sure to execute (right mouse button on the SADP icon, option “run as admin”);
* has the camera, recorder or intercom been switched off in the meantime? then the device has a new start time and the reset is invalid. You will then need to request a new reset;
* I get “device rejected” what is the problem? you are probably connected via a WiFi connection, try the reset again via the wired connection.

The reset-XML only works ONCE!

Regards
Answer by: Frank Ligthart on Jan 18, 2021, 12:15 PM
Hi,

Is it possible to use the video feed from this module as part of my existing surveillance system, while still able to operate as a door bell? I want to avoid having to place two camera's in the same spot (i.e. one for the workstation, and one for permanent surveillance).

Thx!
Martin.
Question by: Maarten Van Damme on Apr 13, 2020, 12:59 PM
No, it is not possible to use this camera for permanent surveillance.

Regards
Answer by: Frank Ligthart on Apr 13, 2020, 1:44 PM
We found other products you might like!