Skip to the beginning of the images gallery

Hikvision DS-KD-KK Doorbell + Nametag Module

Be the first to review this product

Hikvision DS-KD-KK nametag module with 6 additional call buttons adds addresses to which direct calls can be made.

The module is powered via the camera module, which itself is powered via PoE.

Availability: In stock

SKU

DS-KD-KK

€68.00 €56.20

Do you have a question about this product?

Ask question

Details

The module with additional call buttons adds 6 addresses to which calls can be made.

The module is powered via the camera module, which itself is powered via PoE.

Specifications DS-KD-KK

Module with 6 physical bell buttons
Equipped with 8 dip switches
Nutrition by means of DS-KD8003 camera unit
Power consumption <2W.
Dust and water resistant according to IP65
Can be built-in as surface-mounted
Dimensions: 98.21mm (High) x 100.21mm (Wide) x 33.7mm (Deep)

Specifications Hikvision DS-KD-KK Nametag Module

Device Interfaces
Debug:		1
Module-connecting:		2(1 Input, 1 Output)
General
DIP switch:		8
Installation:		Flush Mounting, Surface Mounting
Power Supply:		Powered by DS-KD8003-IME1
Power Consumption:		≤2W
Physical button:		6
Working Humidity:		10% to 95%
Working Temperature:		-40° C to +60° C (-40° F to 140° F)
IP Protection Level:		IP65
Dimensions(L × W × H):		98.21mm×100.21mm×33.7mm(3.87"×3.95“×1.
System Parameters
Operation method:		Physical Button
Processor:		Embedded MCU Processor

Reviews

Blog Posts (1)

Ingress Protection Rating guide

Questions 2

Questions

Where can I find the latest firmware of the intercom units?

Question by: Jerry on Jan 25, 2022, 8:42 PM

Hello, you can find the latest firmware on the Hikvision product page .
Go to the link below and select the product you want. On the product page bottom you will find the firmware.

https://www.hikvision.com/en/products/Video-Intercom-Products/IP-Series/Pro-Series/DS-KD8003-IME1/

Regards

Answer by: Frank Ligthart on Jan 25, 2022, 8:46 PM

Can i program a gsm nummer to a button?

Question by: Roland on Aug 14, 2026, 1:09 PM

Each button is configured to call a Room No. / SIP number in the main door station (typically the DS-KD8003-IME1). Can that SIP number be a GSM/mobile number?
Yes, if you have a SIP/telephone gateway or SIP service that connects to the GSM network. The Hikvision system itself doesn't contain a GSM modem/SIM card. The documentation describes the setup as linking Room No. → SIP number, and call priority can include a Telephone Gateway.

So the architecture would be something like:
DS-KD-KK button → DS-KD8003 → SIP → GSM/SIP gateway → mobile phone

For example, pressing button 1 could ultimately ring +33 6 xx xx xx xx, provided your SIP/GSM gateway is configured to route that call.

Regards

Answer by: Frank Ligthart (Admin) on Aug 15, 2026, 10:52 AM