Hikvision DS-KD8003-IME1/NS Video Intercom Module Door Station

IP Intercom 2.0 video call station module with 2 MP camera, for outdoor use without button in brushed stainless steel design

Availability: In stock
SKU
DS-KD8003-IME1/NS
€184.00 €152.07
Do you have a question about this product?
Frank

Hikvision DS-KD8003-IME1/NS Video Intercom Module Door Station

The Hikvision DS-KD8003-IME1 is a camera module with a Full HD 2 megapixel 180 degree fisheye lens for use in the Hikvision second generation IP intercom system. In the flexible IP video intercom system an outdoor station can be used with only the camera module and up to 8 additional modules such as a keypad module, a card reader module, an indication module and/or a 6-button apartment module. The modules have to be built in or assembled with the separately available housings.

The system works with one or more intercom within monitor(s). An audio/video call with push notifications via the Hikvision smartphone app is also possible.

Specifications DS-KD8003-IME1/NS

  • Stainless Steel Design
  • Single camera module, without bell pusher
  • 2MP HD video quality
  • Fisheye lens
  • Viewing angle (FOV) horizontal of 180°
  • H.264 video compression
  • WDR for backlight compensation
  • Basic access control functionalities
  • Built-in microphone and speaker
  • Noise reduction including echo filtering
  • LAN 10/100 Mbps Ethernet
  • Alarm input/output
  • Equipped with 1 bell pusher
  • Support up to 8 modules
  • Power supply via POE or 12V DC
  • Dust and water resistant according to IP66
  • Can be surface mounted
  • Dimensions: 98mm (high) x 99.8mm (wide) x 43.9mm (deep)

Customer Reviews

Product Questions

Where do I request a password-reset xml-file?
Question by: Frank on Jan 18, 2021, 12:19 PM
Mail the following information to resets@pg-securitysystems.nl:
(WITHOUT this data a password recovery is impossible!)

- The full serial number from SADP (as text);
- A photo of the label on the camera and / or recorder;
- Your name / phone number;
- The export file from SADP (or the start time with the old firmware).

Regards
Answer by: Frank Ligthart on Jan 18, 2021, 12:45 PM
Where can I find the latest firmware of the intercom units?
Question by: Jerry on Jan 25, 2022, 8:42 PM
Hello, you can find the latest firmware on the Hikvision product page .
Go to the link below and select the product you want. On the product page bottom you will find the firmware.

https://www.hikvision.com/en/products/Video-Intercom-Products/IP-Series/Pro-Series/DS-KD8003-IME1/

Regards
Answer by: Frank Ligthart on Jan 25, 2022, 8:46 PM
I get a 'password invalid' after every reboot/factory reset. The provided reset-XML does not work.
What can be wrong?
Question by: Frank on Jan 18, 2021, 12:08 PM
Please make sure you use the right protocol:

>>What if the password reset doesn't work?
* make sure to execute (right mouse button on the SADP icon, option “run as admin”);
* has the camera, recorder or intercom been switched off in the meantime? then the device has a new start time and the reset is invalid. You will then need to request a new reset;
* I get “device rejected” what is the problem? you are probably connected via a WiFi connection, try the reset again via the wired connection.

The reset-XML only works ONCE!

Regards
Answer by: Frank Ligthart on Jan 18, 2021, 12:15 PM
Hi,

Is it possible to use the video feed from this module as part of my existing surveillance system, while still able to operate as a door bell? I want to avoid having to place two camera's in the same spot (i.e. one for the workstation, and one for permanent surveillance).

Thx!
Martin.
Question by: Maarten Van Damme on Apr 13, 2020, 12:59 PM
No, it is not possible to use this camera for permanent surveillance.

Regards
Answer by: Frank Ligthart on Apr 13, 2020, 1:44 PM