The JA-80PB combines a PIR motion sensor with a dual glass-break detector, breaking a window can be detected up to 9 meters away. It uses digital signal processing to avoid false alarms. It provides an input to connect a door sensor. This detector occupies two addresses in the control panel to distinguish between motion and glass breaking. Can be enrolled to the control panel, to UC and AC receivers - to trigger relays - and to the JA-80L indoor siren to indicate movement by making a sound.
The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking. The product is designed for internal use in buildings. The battery-powered detector communicates via OASIS radio protocol.
Specifications
Voltage of PIR sensor
Lithium battery type LS(T)14500 (3.6V AA / 2.4Ah)
Voltage of GBS sensor
Lithium battery type LS(T)14250 (3.6V ½ AA / 1.2Ah)
Typical battery lifetime
approx. 3 years (PIR sensor sleep time 5 min.)
Communication band:
868 MHz, Oasis protocol
Communication range:
approx. 300m (open area)
Recommended installation height:
2 - 2.5 m above floor level
PIR sensor detection angle/detection range:
120° / 12 m (with basic lens)
Glass-break detection range
9m (glass min. 60 x 60cm)
Operational environment according to EN 50131-1
II. internal space
Operational temperature range
-10 to +40 °C
Dimensions
110 x 60 x 55 mm
EN 50131-1, CLC/TS 50131-2-2, EN 50131-5-3 classification: