Jablotron JA-180W wireless PIR / microwave motion detector

The Jablotron JA-180W has a PIR sensor with the combination of microwave detection.

Availability: In stock
SKU
JA-180W+LS14500

Exemption from VAT

Read the REVIEWS

Worldwide SHIPPING

Right of WITHDRAWAL

HelpDesk +31 20 7372 372
Mon to Sat 09:00 - 22:00

JA-180W wireless PIR and MW combined detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms. The detector is used for interiors with the increased risk of false alarms caused, for example, by air flow, curtain movements by draughts or by other sources of false alarm.

When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.

The detector guards the space like a traditional PIR in the case of motion detection, the microwave section is started to verify the movement. Motion confirmed by the microwave element is then forwarded to the control panel and the alarm is triggered. Detector setting is very simple and the PIR and the microwave functions may be tested separately in test mode.

 

The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.

It is addressable and occupies one position in the alarm.


Specifications JA-180W

Power Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah)
Typical battery life about 2 years (switch in position # 3 NORM)
Communication band 868.1 MHz, Jablotron protocol
Communication range 300m (open area)
Recommended installation height 2.5 m above floor
Detection angle / PIR detection range 120 ° / 12 m (standard lens)
Detection range / MW operating frequency 0.5 to 20m / 9.35 GHz
Environment according to EN 50131-1 II. general indoor
Operating temperature range -10 to +40 ° C
Classification grade 2 according to EN 50131-1, EN 50131-2-4, EN 50131-5-3
Dimensions, weight 110 x 60 x 55 mm, 140 g
Complies with ETSI EN 300220, ETSI EN 300440-1, EN 50130-4, EN 55022, 60950-1
Can be operated to ERC REC 70-03
Blog Posts (1)
JA-180W Radar PIR EN
JA-180W Radar PIR EN (81.64 KB) Download