Jablotron JA-180G wireless gas leak detector

The Jablotron JA-180G is activated by combustive gases or fume leakages. JA180G
Availability: Out of stock
SKU
JA-180G

Exemption from VAT

Read the REVIEWS

Worldwide SHIPPING

Right of WITHDRAWAL

HelpDesk +31 20 7372 372
Mon to Sat 09:00 - 22:00

The JA-180G is activated by combustive gases or fume leakages. It uses a hot platinum filament sensor. This detector is mains-powered (230V AC) and besides wireless signalling to the system, it also provides a relay output to shut down an electric gas inlet valve, if installed. Can be enrolled to the control panel and to the JA-150A indoor siren (to indicate activation by making a sound).

The JA-180G detects mixtures of air and combustible gases or fumes (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different reactions. The mains-powered detector indicates a gas leakage optically, and acoustically, and transmits alarm wirelessly via Oasis protocol.


Detector specifications

Sensitivity (concentration):
  MethanePropaneIso-butane
First level 10 ± 3% LEL (0.44% vol) 18 ± 3% LEL (0.30% vol) 23 ± 3 % LEL (0.30% vol)
Second level 18 ± 3% LEL (0.80% vol) 30 ± 3% LEL (0.50% vol) 40 ± 3 % LEL (0.50% vol)

LEL = Lower Explosive Limit (100%) according to IEC 60079-20-1: for methane 4.4% volume concentration. For propane 1.7% vol, for iso-butane 1.3% vol, calibrated in the production of iso-butane

.

Mains 230 V (+10 to -15%) / 50 Hz, about 2 W, protection class II
Beep 94 db / 0.3 m
Relay output optional response to 1st or 2nd level
Capacity of relay max 230 V / 5 A
Operational temperature range -10 ° C to +40 ° C
Relative humidity 25 to 75%
Storage temperature range -20 ° C to +50 ° C
Stabilization time 90 s
Response time up to 10 s
Detection method catalytic combustion
Housing IP 30 (EN 60 529)
Communication band 868.1 MHz, Jablotron protocol
Communication range about 200 m in an open area
Dimensions, weight 101 x 74 x 39, 210 g
Operating conditions ERC REC 70-03
Designed to operate at normal atmospheric pressures 86 to 106 kPa
Meets EN 50194-1, IEC 60079-29-1, IEC 50130-4, EN 55022, ETSI EN 300220, EN 60950-1
Intended for non-explosive areas - Zone 2 EN 60079-10
VVUÚ certified at certification body No 3076
JA-180G Manual EN
JA-180G Manual EN (45.99 KB) Download