Search results for: 'Honeywell'

The Jablotron JA-154J remote control is designed to remotely control setting/unsetting, trigger panic alarms, and control other appliances for multiple control panels.

Confirmation of the execution of a command through optical and acoustic feedback.

The Jablotron JA-111A Base BUS wired outdoor back-up siren is designed to sound alarms, chirps and PG output activation or deactivation.

Powered by the BUS connection.

Backup battery included.

The Jablotron JA-1X1A-C-AN plastic anthracite cover for sirens JA-163A and bus JA-111A.

Security Plan

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The Jablotron JA-110ST BUS wired smoke and temperature detector is designed to detect the presence of fire inside a building.

No internal siren.

Jablotron JA-155J is a universal transmitter. It is used to operate devices remotely, for example opening garage doors.

The Jablotron JA-110B is a bus wired glass-break detector which recognizes the sounds of smashing window panes.

The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

The Jablotron LD-81 detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms), wireless if connected to a JA-150M or JA-81M.

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

JA-KNX is a KNX gateway for the Jablotron 100 alarm systems.

It enables bidirectional communication using the RS485 communication module (JA-121T) from Jablotron.

There are 2 models: standard or DIN-Rail.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The Jablotron JA-110F BUS detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms).

Size: 53 x 20 x 10mm

The Jablotron JA-111i indicates activation of PG outputs by multi-colored LEDs (red, green, blue and yellow).

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-112i BUS activation indicator signals section setting or PG output activation (1-128) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system bus to an RS-485 serial line and vice versa.

Size: 52 x 38 x 14mm

Jablotron JA-115P BUS wired ceiling PIR motion detector is designed to detect human body motion inside buildings.

Detection coverage is 360° with a capture radius of up to 5.5m at a mounting height of 3.5m.

Pet lens

The Jablotron JA-110P has a PIR sensor which covers up to 112m² of floor (optional pet, corridor and curtain lenses).

The AN-868 2PIN external antennas are designed to extend the communication range of wireless devices of the Jablotron security system using a frequency of 868 MHz.

The Jablotron JA-110P has a PIR sensor which covers up to 90° / 7m of floor, its detection characteristics are modified and have a basic immunity to animals.

Curtain lens

Corridor lens

CP-201T Resistor temperature sensors (2 sensors per packaging) are designed for universal use in detecting temperature of liquid, gaseous, and solid substances.

Cable length: 3m

The Jablotron JA-111R is a radio module. Wireless JA-100 devices can be enrolled to the control panel, when this module is installed.

Inclusive housing.

Jablotron JA-196PL mounting box for JA-112P / JA-152P PIR detectors.

Only needed in exceptional places.

Size: 65 x 117mm

Jablotron JA-120Z Bus back-up booster. Designed for current boosting of the bus, extension of the line length and galvanic isolation of the bus.

The Jablotron JA-110R 80 is a radio module designed for communication with one-way wireless devices of the JABLOTRON 80 Oasis system.

GSM rod antenna 900/1800MHz, +4dB, magnetic, hight 29 cm, cable 3m, SMA connector.

Can be used with JA-194Y, JA-191Y, CA-1201, CA-1202, Jablotron 100 and OASiS series.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane).

The detector detects two levels of gas concentration, responding with 2 different relay output reactions.

Jablotron Alarm Sticker

80 x 50mm

The Jablotron JA-150IR optical barrier is designed for the indication of a breach into a certain area by crossing the IR line between the transmitter and the receiver (60 metres).

Including: 4 x Bat-3V6-R20

JA-191PL Jointed bracket for JA-1x1P/1x2P PIR detectors. Only needed in exceptional places.