Jablotron JA-80L kabellose Innensirene - Alle Fragen

Hi Gibraltar,

Here is some information concerning resetting the JA-80L:

All enrolled devices can be deleted as follows:
1. Unplug the siren from the mains socket.
2. Press and hold the siren button while plugging in the siren again.
3. Keep the button pressed until two beeps are heard which confirm a reset.
4. The indicator keeps flashing (device enrollment mode).
5. To exit enrollment mode, press the siren button (indicator turns off).

If the indicator fails to flash after the two reset beeps, it means that the siren is within radio range of the control panel to which it has been previously enrolled. In such a case, all devices previously enrolled to the siren have been deleted except for the control panel. If you deliberately do not want to use the siren with the control panel anymore, it must first be deleted in the control panel before
resetting the siren (in control panel enrollment mode select the siren’s address and press and hold key 2 on the system keypad to delete the siren).

Check also the JA-80L manual.

Regards