Jablotron AC-160 DIN wireless Relay (max 16A, 250V AC / 24V DC)

Jablotron AC-160 DIN wireless multi-functional relay for DIN-rail installation, it can be installed as a stand-alone device without a link to a control panel.

Disponibilité: En stock
Sku
AC-160-DIN
Vous avez une question sur ce produit?
Frank

AC-160-DIN wireless Multi-functional Relay for DIN-rail installation

It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK.

The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port.

It is designed to be mounted on a DIN rail. It occupies one position (zone) in the system.


Specifications

Power supply ~ 230 V / 50 Hz, protective class II.
Internal power consumption 0.4 W / max. 1.5 W
Loading capacity of the power relay contacts:
(galvanically isolated from the control terminals) protection class II:
   Max. switched voltage 250 V AC / 24 V DC
   Resistance load (cosφ=1) max. 16 A
   Inductive, capacitive loads (cosφ=0.4) max. 8 A
   Halogen lighting max. 1000 W
   Minimum switched DC power 0.5 W
Wire cross section max. 2 x 1.5 mm2; max. 1 x 2.5 mm2
Dimensions 18 x 90 x 65 mm, 1 DIN module
Environment according to II. indoor, general, in accordance with EN 50131-1
Operating temperature range -10 to +40 °C
Ingress protection class IP20, IP40 for the front panel (EN 60529)
In conformity with ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581.

Avis des clients

Questions sur les produits

Aucune question pour l'instant. Soyez le premier à poser la question !