Jablotron JK-84 wireless alarm kit
The Jablotron JK-84 is an OASiS alarm kit based on the Jablotron JA-82 control panel.
The Jablotron JK-84 is an OASiS alarm kit based on the JA-82 control panel. Complete wireless communication (868MHz protocol) with all components, easy installation and configuration.
A Jablotron kit contains the following:
► JA-82K - control panel, check HERE for more information;
► JA-82R - radio module, check HERE for more information;
► JA-83M - compact window/door detector, check HERE for more information;
► SA-201 - wired window/door detector, check HERE for more information;
► JA-83P - compact movement/PIR detector, check HERE for more information;
► RC-86 - remote control/keyfob buttons, check HERE for more information;
► PC-01 - proximity card, check HERE for more information;
► JA-81F - keypad unit, check HERE for more information;
► JA-80L - indoor siren, check HERE for more information;
► SA-214 - backup battery;
Connected devices can be assigned to 3 sections: A, B or C. Assignment to a section has its effect when partial setting is used e.g. only A is set, AB is set, or ABC is set (which, for example, would be suitable for homes where A could mean afternoon setting, AB night setting and ABC total setting), or if the system was split into two independent partitions A and B, with a common section C. In the second case, each A or B section can be set individually, and C is automatically set when both A and B have been set by users. This would be suitable for two independent families in a single house, or two companies in one building.
The system can be operated by user codes and/or access cards/key-fobs (PC-01/02/04). The system can recognise up to 50 different users. Each of the possible 50 users can have his own 4-digit access code and/or access card. It is possible to program different reactions to access codes or access cards and if the system is split, it is possible to program which part of the building is accessible by a particular code or card. Setting (arming) and unsetting (disarming) is possible by card or code, and if a higher security level is needed it is possible to make it compulsory to confirm the validity of a card by code entry.
Programming the system is possible by OASiS keypads such as the wireless JA-80F or the hard-wired JA-80E, and also by computers running OLink software (with the JA-82T cable). Programming with the software is by far the most easy and organised option. Further options offer programming by mobile phone or the internet.
To connect a hard-wired keypad or a computer, the control panel is equipped with a digital bus provided by terminals and RJ connectors.
The control panel has two alarm outputs: IW = internal (indoor) warning and EW = external (outdoor) warning. Both these signals are also available as wireless signals. There are also two programmable outputs in the control panel, PGX and PGY whose functions can be configured. The PG outputs are not only available as physical control-panel terminals, but also as radio signals for the control of UC and AC receiver outputs.
Jablotron's alarm system has a building block structure like LEGO, so you can create your own configuration or use our JK-82 starter kit. Installation of the kit in your house is a piece of cake! Let us know if you need any direction on how to install the components.