Jablocom EYE-02 GSM camera
The Jablocom EYE-02 is a stand-alone security camera designed for do-it-yourself easy installation and operation, which can record videos, and transfer individual video frames on demand via the GSM network and much more.
The EYE-02 is a stand-alone security camera designed for do-it-yourself easy installation and operation, which can record videos, and transfer individual video frames on demand via the GSM network and much more. MMS, SMS, and voice calls are supported together with the online transfer of individual video frames to your cell phone. Also see the Jablocom site.
JabloTool WEB is a service at www.jablotool.com. User accessing its EYE-02 camera trough the JabloTool WEB will be guided to establish the connection to the camera. If the user is not registered or if the EYE-02 camera is not protected by a Remote Access Password, the user will have to send a special SMS authorization command from his mobile phone first to initiate the EYE-02 camera connection to JabloTool.
EYE-02 is a security and monitoring video camera communicating with the owners through a GSM network. The camera sends alarm messages through MMS, e-mail, SMS and voice communication. The device also supports communication with monitoring stations (MS). The camera is able to communicate with up to 10 telephone numbers, 10 e-mail addresses and 2 MS. Copies of images and videos are stored in the memory card and on a web server. Thanks to night vision the EYE-02 camera monitors 24 hours a day. EYE-02 is equipped with a group of inbuilt internal detectors providing for the detection of trespassing in the monitored space:
- a PIR motion detector
- a noise level detector - a glass-break detector
- a tilt and vibration detector
- an in-picture motion detector
The GSM camera also cooperates with a wide range of OASiS wireless detectors. Up to ten detectors may be assigned. An inbuilt microphone allows for the remote bugging of the monitored space.
Easy Installation for Everybody
The distinctive features of the camera include very easy (even lay) installation combined with sophisticated (professional) computer (JabloTool SW)-assisted settings. Installation and setting of one of the preset camera modes is completed in a couple of easy steps and you do not need more than the package contents for that. Easy control is demonstrated by the five basic predefined guarding profiles – for households, outdoors, shops and stores, small children or seniors dependent on their carers. Individual tuning or optimisation of parameters are facilitated by use of the JabloTool SW. The software allows for the transparent setting of the parameters of the inbuilt detectors, video recording, contact telephone number and e-mail address setting, MS communication, incident viewing etc. In-picture motion detection setting for example allows for masking of part of the scanned image, thus defining the area within which the motion will be detected and the rest of the field of view where any motion will be ignored.
Camera Control and Still Image Viewing from Anywhere
Camera settings can be controlled not only from the connected computer but also through remote access via the internet application JabloTool WEB service.
* Quad band GSM module with GPRS.
* 868MHz radio receiver for wireless security system extension.
* Li-Ion backup battery.
* USB 2.0 port.
* Video storage on standard SD micro Flash Card.
* Operating temperature from -10 to +55 °C.
* Suitable for outdoor installation.