Jablotron JA-110A BUS wired indoor Siren

Jablotron JA-110A BUS wired indoor Siren 1 5 5 1

The Jablotron JA-110A is a BUS-powered siren which sound alarms, as well as entrance and exit delays and PG activations.

Availability: In stock
SKU
JA-110A
Do you have a question about this product?
Frank

The JA-110A is a mains-powered (230V AC) siren which sounds an alarm and indicates exit & entrance delays. If disconnected from the power while it sounds an alarm, it reports tampering to the system (i.e. intruder verification). Can also be used as a doorbell and as acoustic indication of detector triggering. Its indicator function is programmable.

Possible uses:
- An indoor alarm siren;
- A wireless door bell;
- A detector-triggered chime;
- A sounder for entrance and exit delay beeps;
- Thief verification.

The siren is bus-powered and communicates via JA-100 BUS wired protocol.


JA-110A BUS internal siren

ncp insert certificering

Addressable and occupies one control panel logical position.


Specifications JA-110A

Power Control panel bus 12V (9 ... 15 V)
Current consumption in standby (quiescent) 5 mA
Current consumption for choice of cable 30 mA
Siren piezo electric, 90 dB / m
Dimensions 80 x 80 x 28 mm
Classification grade 2 according to EN 50131-1, EN 50131-4
Environment according to EN 50131-1. general indoor
Operating temperature range -10 to +40 ° C
Complies with EN 50130-4, EN 55022, EN 60950-1

Customer Reviews

5
5 out of 5 stars
100%
1 Reviews
100% of customers
recommend this product
5 stars 1 (100%)
4 stars 0 (0%)
3 stars 0 (0%)
2 stars 0 (0%)
1 star 0 (0%)
Sort by
Rating
Newest
Helpfulness
Verified Buyer
Tevreden
5
27 Feb 2019
Goed product met een sobere afwerking en een compacte envelop.
Was this review helpful? 0
Blog Posts (1)

Product Questions

Hello,
I see on the product page the JA-110a can be used as a doorbell. However, in the manual I do not see this function. How can this behaviour be achieved?
Question by: Vincent on Jun 26, 2019, 8:53 AM
You can do this with the PG outputs:
1. Select the doorbell under the devices and assign PG1 (or any other PG) in the PG Activation column;
2. Go to the internal settings of the indoor siren and select Signalling PG, for PG1 you can select a chime in the drop down menu.
3. Go to the PG outputs tab and select the function Impuls for 3 seconds.

Regards
Answer by: Frank Ligthart on Jun 26, 2019, 10:19 AM